Custom Build Lab. Over the next 10 forges you'll design a prop inspired by a film or game, split it into parts that fit our printers, and join every part with printed pins, clips, hinges and slides you have tested yourself. Then it goes on show in the class Prop Museum.
Need to log into Minecraft Education, Canva, or any other app that asks you to sign in? Most school and app accounts use the same login: your username is [email protected] (add a number if your name needs one, e.g. firstname.lastname2), and your password is the same one you use to log into your school computer.
Every project has at least one thing to hand in. Log into connect.det.wa.edu.au with your firstname.lastname and computer password, then head to your class and open the Submission section. Handing in more than one file? Zip them together first - total size must stay under 50MB.
Design a prop inspired by a film or game, split it into parts that fit our printers, join every part with a printed joint you have tested, and show it off in the class Prop Museum.
| Criteria | Sketch (0-1) |
Rough Cut (2-3) |
Print Ready (4) |
Museum Grade (5) |
Score |
|---|---|---|---|---|---|
| Design & Modelling | One part modelled, or parts too big for the printer or with obvious errors | Most parts modelled at real size, split to fit the 150mm box, with most design rules followed | Every part modelled cleanly, split on sensible lines, walls and overhangs within the rules | Clean split lines that look designed, detail that prints, and a prop that clearly shows its inspiration | / 5 |
| Joints & Fit | Parts do not join, or are held together with something other than printed joints | Parts join with pins, but some are too tight or loose | Every joint uses a tested clearance and fits as intended, including one moving or clip joint | Joints are deliberate and repeatable, and the moving joint works every time | / 5 |
| Testing & Fixing | No coupon or fit log | Coupon printed and fit log started, with at least one fix | Coupon results used to choose clearances, and fixes written as evidence, change and reason | Fixes are proven by a reprint, and any remaining problems are honestly explained with a next step | / 5 |
| Museum & Talk | No placard or exploded view, or did not take part in the museum | Placard and exploded view handed in, short talk given | Clear placard and labelled exploded view, a confident talk, and specific feedback given | Polished placard and exploded view that teach visitors how it joins, and feedback acted on | / 5 |
| Total | / 20 | ||||
| Flat faces | Both sides of a split get a flat face, so each part prints standing on it |
| Hidden seams | Split along an edge, a groove or a panel line, where a seam looks designed |
| Room for pins | The faces that meet must be big enough for at least two pins |
| Fits the box | Every part fits inside 150 x 150 x 150 mm, with room to spare |
| Snug fit | 0.1 to 0.2 mm gap: parts stay together but pull apart by hand. Use it for alignment pins |
| Moving fit | 0.3 to 0.5 mm gap: parts turn or slide freely. Use it for hinges and spinning parts |
| Sliding parts | Leave about 0.3 mm on each surface that touches |
| Our printers | Accurate to about 0.2 mm either way, so the coupon decides, not the table |
| Pins | Model pins as separate parts printed lying down (strong), or as part of the piece if they are short and fat |
| Sockets | Hole = pin size + your snug clearance, about 1 mm deeper than the pin |
| Two, not one | Two pins per joint so the parts can't twist |
| Walls | At least 2 mm of wall around every socket |
| Size | Every part fits inside 150 x 150 x 150 mm and sits flat on the workplane |
| Walls | Every wall is at least 1.2 mm, and at least 2 mm around sockets |
| Joints | Snug joints use your coupon's snug clearance, moving joints the moving one |
| Overhangs | Nothing sticks out past about 45 degrees without a reason, and no overhang sits inside a joint gap |
| Pins | Every pin has a matching socket on the other part, checked from underneath |
| Raised detail | At least 1.2 mm wide and sitting on the surface, not floating |
| Cut-in lines | About 1 mm deep, cut with a hole shape |
| Colour | One colour per part, so a different colour means a separate part |
| Text | Big and bold: thin letters can disappear on our 0.4 mm nozzle |
| Evidence | "Visor hinge would not turn: the gap was 0.2 mm and it fused" |
| Change | "Make the knuckle hole 0.4 mm bigger than the hinge pin" |
| Reason | "The 0.4 mm coupon hole let the pin spin freely" |
After 10 forges of designing, splitting, testing and fixing, your prop goes on display with its placard and exploded view. Every maker guides visitors around their prop, every maker gives feedback, and the class votes for the awards.
Pick your prop and sketch it // Forge 01