Over the next 10 labs you'll work like a real product engineer: take a brief from a client, design a two-part product in Tinkercad, 3D print it, test it, find what went wrong and print a better one. Real measurements. Real test results. Real Demo Day.
5x FlashForge Adventurer 3 printers. Build volume is 150 x 150 x 150mm, nozzle is 0.4mm, and a printed part can be out by about 0.2mm either way. Submit your design through Connect and it joins the shared print queue - plan on your print being back by your next lesson.
⚠ Big parts take hours. Small parts print sooner, so keep yours compact.
📏
Tolerance Toolkit
Tolerance is the tiny gap that lets two parts fit together. Printed holes come out a little small, so model them 0.2-0.4mm bigger. Parts that must move need a 0.3-0.5mm gap, and a snug fit needs 0.1-0.2mm. These are starting points - your Lab 04 test coupon proves what our printers really do.
🎓
Skills Bootcamp
10 quick official Tinkercad tutorials cover every tool you'll need - Place, Move, Rotate, Size, Group, Copy, Duplicate, Hide, Align and View. Full checklist is in Lab 02.
⚠ AI can get tool names and measurements wrong - always double check against the real editor and your real prints!
🏁
Demo Day Rules
On the final day you pitch your product and show your test evidence to the class, using a one-page product sheet made in Canva. Listen to every pitch, give real feedback, then vote: Best Fit, Best Improvement, Best Design and People's Choice.
// Logins & Submitting Your Work
🔑 Signing Into School & App Accounts
Need to log into Minecraft Education, Canva, or any other app that asks you to sign in? Most school and app accounts use the same login: your username is [email protected] (add a number if your name needs one, e.g. firstname.lastname2), and your password is the same one you use to log into your school computer.
📤 Submitting via Connect
Every project has at least one thing to hand in. Log into connect.det.wa.edu.au with your firstname.lastname and computer password, then head to your class and open the Submission section. Handing in more than one file? Zip them together first - total size must stay under 50MB.
// Primary Objective
Choose a client brief, then design, print, test and improve a two-part product that genuinely fits together - and pitch it at Demo Day with real test evidence.
Design two 3D printed parts in Tinkercad that fit together and solve your client's problem
Test your tolerances with a test coupon, then test your prototype against real measurements
Improve your design in a second prototype, using evidence from your tests, not guesses
Pitch your product and its evidence on Demo Day, and give real feedback to other designers
// Marking Key & Rubric
Criteria
Rough Sketch (0-1)
Working Model (2-3)
Print Ready (4)
Excellence (5)
Score
Design & Modelling
Only one part modelled, or the model has obvious errors (floating pieces, holes not cut through)
Two parts modelled from real measurements, printable, with most design rules followed
Clean, accurate model that meets the client brief, with walls, holes and overhangs all within the design rules
Design choices are clearly reasoned from the brief and measurements, and the model is tidy, well aligned and easy to print
/ 5
Fit & Function
Parts do not fit together, or the product does not do its job
Parts fit with some force or wobble, and the product mostly does its job
Parts fit as intended and the product does what the brief asked with the real object
Fit is deliberate and repeatable (snug or smooth as designed) and the product works reliably in every test
/ 5
Iteration & Testing
No test coupon or test log, or Prototype 2 is the same as Prototype 1
Coupon and test log completed, and at least one change made in Prototype 2
Test evidence clearly linked to three changes, and Prototype 2 shows each of them
Before and after results prove Prototype 2 is better, and any remaining problems are honestly explained with a next step
/ 5
Demo Day & Communication
Did not pitch, or no product sheet or reflection handed in
Pitched the product, and handed in a product sheet and a reflection
Clear pitch backed by test results, specific feedback given to other designers, and a product sheet that is easy to read
Confident pitch that uses evidence to persuade, feedback acted on, and a polished product sheet with a reflection showing full ownership
/ 5
Total
/ 20
Scroll sideways to see every column
Lab Sessions
Week 1
01
🎯 Meet the Client
▾
// LAB OBJECTIVEClient brief chosen, problem sentence written, 3 needs and 3 constraints listed, 3 real products researched and a plan for the two parts.
Learn the challenge: working on your own, you'll design a two-part product for a client in Tinkercad, print it, test it, improve it and pitch it. The two parts must fit together - that's what makes it an engineering problem, not just a shape
Read the six client briefs below and choose the one you'd most like to solve. Check the rubric above so you know what a top result looks like
Write your problem in one sentence: "My client needs a [product] that [does what] for [who]"
List 3 user needs (what it must do) and 3 constraints (limits like size, print time and the 150mm print bed)
Research: find 3 real products that solve a similar problem. For each one, note what works well and one thing you'd improve
Decide which two parts your product needs and how they will join (a peg in a hole, a lid on a box, a slot, a clip, or a sliding piece)
📱 Phone StandClient: a student who watches videos at their desk. Needs a stable base plus a rest or insert that holds the phone at a good angle.
🗂️ Desk OrganiserClient: someone whose desk is a mess. Needs a pen pot or tray plus a lid or divider that fits inside it.
🔌 Cable HolderClient: a gamer with tangled charging cables. Needs a base that grips cables plus a cover or clip that keeps them in place.
🎒 Bag HookClient: a student with a heavy bag and no floor space. Needs a mount that fits a desk or chair edge plus a hook piece that attaches to it.
🎧 Earbud CaseClient: a commuter who keeps losing their earbuds. Needs a small box plus a lid that stays shut but opens easily.
🌱 Herb PlanterClient: someone growing herbs on a windowsill. Needs a small pot plus a drip tray that fits neatly underneath it.
💡 HintPick the brief where you can get your hands on the real object it holds or fits around. A product measured from the real thing beats one designed from a guess every time.
// ASK AI"What questions should a product designer ask a client before starting to design a phone stand?"
02
🎓 Tinkercad Refresher
▾
// LAB OBJECTIVEAll 10 tutorials ticked off, snap grid tried at 0.1 mm, and a measurement table for your real object with every key dimension recorded twice in mm.
Join the Year 8 Tinkercad class using the login card in your Lab Kit above, then log in with your last name
Work through the 10 official tutorials below, ticking each one off as you go. Already confident with a tool? Do the tutorial quickly anyway - it might show you a shortcut
Practise typing exact sizes: place a box on the Workplane, click it and type exact millimetre dimensions into the size boxes rather than dragging the handles
Find the Snap Grid control at the bottom right of the Tinkercad window and try the 0.1 mm setting - a smaller snap moves shapes in finer steps, which you'll need for tight fits
Now measure the real object your product must hold or fit around, using a ruler (or calipers if your teacher has some). Measure every important length, width, thickness and diameter in millimetres
Measure each dimension twice. If the two numbers differ, measure a third time and use the most common value
Record everything in a measurement table (Canva, paper or a document): what you measured, where on the object, and the value in mm
9. Align ItLine shapes up precisely - centres holes and slots
10. View ItUse the ViewCube to check your design from every side
📏 Measure Like an Engineer
Units
Always millimetres. Tinkercad works in mm, so measure in mm to avoid conversion mistakes
Twice
Measure every key dimension twice and write both numbers down
Widest point
Measure an object where it is biggest - that's the size your product has to make room for
Clearance
Record the real measurement only. You add clearance in the model, so never squeeze it into your notes
💡 HintRulers are read to the nearest millimetre, and a 1mm reading mistake is bigger than the 0.2mm gap you're trying to get right. Measure carefully now and you'll save a whole print round later.
// ASK AI"Why is it important to measure a real object more than once before designing something to fit around it?"
// LEVEL UPFind the smallest and largest real object your product might need to work with (for example a thicker phone or a bigger cable) and measure both. Which size will you design around, and why?
Week 2
03
✏️ Concepts & Spec
▾
// LAB OBJECTIVEThree concepts compared, one chosen with reasons, and a design spec with your measurements and rules, submitted.
Sketch 3 different concepts for your two-part product on paper or in Canva. Label the two parts and show how they join
Compare your concepts against your 3 needs and 3 constraints from Lab 01. Give each concept a score out of 3 for: meets the need, easy to print, and parts fit together simply
Choose your best concept and write down why you chose it, using the scores as evidence
Write your design spec: a short table listing Part A, Part B, how they join, your key measurements from Lab 02 (in mm), and the design rules below that apply to your product
Decide what will be a hole, a slot or a peg, and roughly what size each needs to be based on your real measurements
Export your concepts and design spec and submit them through Connect
📏 Design Rules for Our Printers
Wall thickness
1.2mm or more for any wall (2mm around holes that get handled). Anything under 0.8mm may not print at all
Holes
Printed holes come out smaller than modelled - make holes 0.2-0.4mm bigger than the thing going in them
Overhangs
Anything sticking out beyond about 45 degrees needs support material underneath, so design flat bases and gentle angles
Size limit
Each part must fit inside 150 x 150 x 150mm - smaller prints faster, so aim well under that
💡 HintA simple joint that works beats a clever joint that doesn't. A peg in a hole, or a lid on a box, is a great choice for a first product.
// ASK AI"What are the simplest ways two 3D printed parts can join together without glue or screws?"
📤 Submit via ConnectYour 3 concept sketches and design spec (exported as a PDF or PNG)
// LEVEL UPAdd a fourth concept that joins its two parts in a completely different way (a clip instead of a peg, for example) and score it against the same 3 needs. Does it beat your chosen concept?
04
🧪 Tolerance Coupon
▾
// LAB OBJECTIVEA labelled coupon with 4 clearances (0.2 to 0.5mm) and a matching peg checked from every angle and submitted, plus your written prediction.
Learn the problem: a 3D printer never prints to the exact number you type. Our printers can be out by about 0.2mm either way, so a hole modelled at exactly the size of a peg will usually be too tight. Engineers solve this with a test coupon - a small test print made only to measure the fit
Decide what your product's joint is (a peg in a hole, a slot, or a lid) and design a coupon for that joint
Model your coupon: a small flat plate with a row of 4 holes (or slots), each one bigger than your peg by a different clearance: 0.2mm, 0.3mm, 0.4mm and 0.5mm. Also model the matching peg as a separate small piece
Add a label next to each hole with the Text shape (0.2, 0.3, 0.4 and 0.5) so you know which is which after printing
Keep the coupon small and flat so it prints quickly, then use View It to check every hole cuts all the way through
Write a prediction: which clearance do you think will fit best, and why?
Submit your coupon through Connect for the print queue
🧪 Clearance Starting Points
Snug fit
0.1-0.2mm gap - parts stay together but can still be pushed apart by hand
Loose or moving fit
0.3-0.5mm gap - parts slide, spin or lift off freely
Sliding parts
Leave about 0.3mm on each surface that touches, so both sides need a gap
Your printers
Accuracy is about 0.2mm either way, so the coupon tells you what actually works, not the table
💡 HintWhile your coupon prints, think about what you'll do with the answer. If 0.3mm is snug and 0.4mm is loose, which one does your product need?
// ASK AI"Why do 3D printed holes usually come out slightly smaller than the size in the design file?"
📤 Submit via ConnectYour tolerance test coupon Tinkercad file (share link)
// LEVEL UPAdd a second row to your coupon for a different joint shape, such as slots as well as pegs, using the same four clearances and labels. Predict whether the best clearance will be the same for both.
Week 3
05
🧩 Model Prototype 1
▾
// LAB OBJECTIVECoupon results recorded, a clearance chosen with a reason, and two modelled parts for Prototype 1 that follow your design spec.
Collect your printed coupon and peg and test each clearance by hand. Record the result for each hole: too tight, snug, loose or falls out. Compare it with your prediction from Lab 04
Choose the clearance your product needs and write down why (for example: "0.3mm was snug, and my lid needs to stay on but still open")
Open a new Tinkercad design and model Part A first, using your measurements from Lab 02 and the wall rule from Lab 03
Model Part B so it joins Part A using your chosen clearance. Model holes and slots as separate hole shapes, then use Group It to cut them into the solid
Use Align It to centre holes, slots and pegs so both sides of your joint are even
Move the two parts apart on the Workplane and lay each one on its flattest face, so it prints without supports. Keep both parts well inside the print bed
Check every wall against the 1.2mm rule and every overhang against the 45 degree rule in your design spec
💡 HintModel a hole and the part that goes in it as separate simple shapes first and get their sizes right. Group everything as your very last step - fixing a badly placed hole after grouping usually means starting that shape again.
// ASK AI"How do I use a hole shape and the Group tool in Tinkercad to cut a slot into a solid block?"
// LEVEL UPChange the design so the two parts can only fit together one way round, using a notch, a flat side or an off-centre peg. Why would a real customer want that?
06
✅ Check & Submit
▾
// LAB OBJECTIVEPrototype 1 passes the checklist, is peer checked, submitted for printing, and you have a test plan and test log ready.
Run the checklist below on both of your parts. Fix anything that fails before you submit, because a failed print costs you a whole lesson
Use View It to look at your parts from underneath and from the side, not just the top - hidden problems like holes that don't cut through or floating pieces show up there
Swap with a classmate and quality check each other's design using the checklist. Write down one thing they got right and one thing to fix
Fix the problems your partner found, then submit your Prototype 1 file through Connect for the print queue
While you wait, write a test plan for Lab 07: how will you check that the parts fit, that the product works with the real object, and how close the printed sizes are to your design?
Set up a test log (paper or Canva) with columns for: test, what I expected, what happened, pass or fail
✅ Print-Ready Checklist
Walls
Every wall is at least 1.2mm thick
Holes
Holes are 0.2-0.4mm bigger than what goes in them, and cut all the way through
Joint
The gap between the two parts matches the clearance your coupon proved
Overhangs
Each part sits on a flat face and has no big overhangs beyond about 45 degrees
Size
Both parts fit inside the 150mm print bed with room to spare, and neither part overlaps the other
💡 HintPrint time grows quickly with size. If a part looks like it would take hours, ask whether it can be smaller, thinner or hollowed out and still do its job.
// ASK AI"What tests could I run to check whether a 3D printed phone stand fits a phone and holds it steady?"
📤 Submit via ConnectYour Prototype 1 Tinkercad file (share link) and your coupon results
Week 4
07
🔬 Test Prototype 1
▾
// LAB OBJECTIVEFit, function, measure and peer tests recorded, and your top 3 changes written up as evidence, change and reason.
Collect your printed Prototype 1. Before testing, look at it closely and write down anything that looks wrong: warping, rough edges, missing details, or broken parts
Fit test: do the two parts join? Record whether the joint is too tight, snug, loose or won't go together, and by how much
Function test: try your product with the real object from the client brief. Does it hold, cover, hang or sit the way it should?
Measure test: measure three key sizes on the printed part with a ruler and compare each with the number in your model. Write the difference in mm
Peer test: swap products with a classmate and let them try yours without any help from you. Watch what confuses them, and ask for one thing they would change
Fill in your test log with every result, using real numbers wherever you can
Rank your problems from most to least serious, then choose the top 3 to fix. For each one write: the evidence, the change, and why the change should work
Submit your test log through Connect
📋 Evidence to Change Table
Evidence
What you saw or measured, with a number: "the peg was 0.3mm too wide"
Change
What you will alter in the model: "make the hole 0.3mm bigger"
Reason
Why it should work: "the 0.4mm coupon hole was snug"
💡 HintA failed test is not a failed project. A print that doesn't fit gives you your best evidence, because it tells you exactly what to fix.
// ASK AI"My 3D printed lid is too tight. What are three different changes I could try to fix it, and how would I know which one worked?"
📤 Submit via ConnectYour completed test log with your top 3 evidence-based changes
// LEVEL UPRepeat the peer test with a second classmate. If two different people get stuck in the same place, that is much stronger evidence for your top 3 changes.
08
♻️ Redesign Prototype
▾
// LAB OBJECTIVEThree evidence-based changes made and noted, the checklist passed again, and Prototype 2 submitted for printing.
Keep your Prototype 1 file safe by making a copy of the design before you change anything, so you always have the original to compare against (ask your teacher if you can't find how)
Open your test log and make the top 3 changes in the model, one at a time. After each change, write a note: what you changed, the exact measurement, and why
Check that fixing one problem hasn't created another - a bigger hole might now leave a wall thinner than 1.2mm
Level up: add one improvement that isn't a fix, such as rounded edges, a label or logo with the Text shape, or a change that saves print time
Run the Print-Ready Checklist from Lab 06 again on both parts and use View It to check from every side
Swap with a classmate for one more quality check, then submit Prototype 2 through Connect for the print queue
While it prints, start your product sheet in Canva: your brief, your measurements and your Prototype 1 results
💡 HintChange only what your evidence tells you to change. If you redesign everything at once and it works, you won't know why - and if it fails, you won't know what broke it.
// ASK AI"Why do engineers change only one thing at a time between prototypes?"
📤 Submit via ConnectYour Prototype 2 Tinkercad file (share link) and your change notes
Week 5
09
🏆 Final Test & Sheet
▾
// LAB OBJECTIVEPrototype 2 tested against Prototype 1 with real numbers, a finished product sheet submitted, and a 60 second pitch planned and practised.
Collect your printed Prototype 2 and repeat exactly the same fit, function and measure tests you ran on Prototype 1, using the same test log
Compare the two prototypes side by side in a before and after table. Did each of your 3 changes work? Use numbers, not opinions
Something still not right? Be honest. Write what you would change in a Prototype 3 and why - an honest result with a clear next step is worth more marks than a hidden problem
Finish your one-page product sheet in Canva: product name, client brief, a photo or sketch of both prototypes, key measurements in mm, your before and after results, your 3 changes and your next step
Export your product sheet as a PDF or PNG and check that every number is readable
Plan a 60 second pitch in four parts: the client's problem, your design, your test evidence, and what you improved
Practise your pitch out loud once with a classmate, and trim it to fit the time
1. The ProblemWho is the client and what did they need? One sentence.
2. The DesignShow the two parts and how they join. Point at the real thing.
3. The EvidenceShare one number from your tests that proves it works or shows what you learned.
4. The ImprovementSay what changed between Prototype 1 and 2, and why the change worked.
💡 HintPut your best number on the product sheet in large text, such as "0.3mm clearance, snug fit". One clear result is more convincing than a page full of small print.
// ASK AI"Give me a simple structure for a 60 second product pitch that uses test results as evidence"
📤 Submit via ConnectYour product sheet (exported as a PDF or PNG)
10
🏁 Demo Day
▾
// LAB OBJECTIVEPitched your product on Demo Day, gave feedback to at least 2 other designers, and submitted your files, product sheet and reflection.
Set up your display: both prototypes (Prototype 1 and Prototype 2), the real object your product works with, and your product sheet
Safety and format briefing: handle other designers' prototypes gently, only pick up something when its designer says you can, and listen quietly during every pitch
Deliver your 60 second pitch to the class: the problem, your design, your evidence and your improvement
Take part in the gallery walk: visit at least 3 other displays, look at the prototypes, and read their product sheets
Give one specific compliment and one specific suggestion to at least 2 other designers. Base your suggestion on evidence you saw, not on opinion
The class votes across categories: Best Fit, Best Improvement, Best Design and People's Choice
Complete your final reflection: what went best, what you'd change with more time, and one thing you learned about tolerances, testing or improving a design
Submit your final design files, product sheet and reflection through Connect
💡 HintIf your pitch feels too long, cut everything except the problem, one clear test result and one improvement. Nerves make people talk fast, so slow down and point at the real prototype.
// ASK AI"Help me write a short reflection paragraph about what I learned designing, printing and testing a two-part product"
📤 Submit via ConnectYour final Tinkercad files (Prototype 1 and 2 share links), your product sheet, and your final reflection
🏁
Demo Day Awaits
After 10 labs of measuring, printing, testing and improving, your product goes on display in front of the whole class. Every designer pitches, every designer gives feedback, and the class votes for the awards.
Then pick your client brief and start measuring // Lab 01
SYSTEM ONLINE // YEAR 8 DIGITAL TECHNOLOGYPROTOTYPE PRODUCT LAB // 10 LABS
// Digital Technology - Year 8 //
PROTOTYPE PRODUCT LAB
10 labs. One real product. Take a brief from a client, design a two-part product in Tinkercad, 3D print it, test it with real measurements, and print a better one. Then pitch it at Demo Day.
📐Tinkercad CAD🖨️3D Printed📏Tolerance Tested🏁Demo Day
Use the arrow keys or the buttons below. Contents jumps to any lab.
// Contents
Pick a Lab
Review = that lab opens with a Daily Review (button in the lab's objective box on the page).
01
// Lab 01 · Week 1
🎯 Meet the Client
// LAB OBJECTIVE
Client brief chosen, problem sentence written, 3 needs and 3 constraints listed, 3 real products researched and a plan for the two parts.
// Lab 01 · The project
You Are the Engineer
A client has a problem. You'll design a product with two parts that fit together, print it, prove it works with real tests, and improve it. The fit is the whole game: that's what makes this engineering, not just a shape.
BriefPick a clientL01
MeasureThe real objectL02
SpecConcepts + rulesL03
CouponProve the fitL04
ModelPrototype 1L05-06
TestReal numbersL07
ImprovePrototype 2L08-09
PitchDemo DayL10
Key wordA prototype is a version you build to test. Real engineers expect Prototype 1 to have problems: finding them is the point.
// Lab 01 · Choose your client
Six Briefs
📱 Phone Stand
A stable base plus a rest that holds the phone at a good angle.
🗂️ Desk Organiser
A pen pot or tray plus a lid or divider that fits inside it.
🔌 Cable Holder
A base that grips cables plus a cover or clip that keeps them in.
🎒 Bag Hook
A mount for a desk edge plus a hook piece that attaches to it.
🎧 Earbud Case
A small box plus a lid that stays shut but opens easily.
🌱 Herb Planter
A small pot plus a drip tray that fits neatly underneath.
Pick smartChoose the brief where you can get your hands on the real object. Measured from the real thing beats designed from a guess, every time.
// Lab 01 · Today's task
Define the Job
Write your problem in one sentence: "My client needs a [product] that [does what] for [who]"
List 3 user needs (what it must do) and 3 constraints (limits like size and print time)
Research 3 real products that solve a similar problem: what works, what you'd improve
Decide your two parts and how they join
Ways two parts can join
A peg in a hole
A lid on a box
A slot
A clip
A sliding piece
Check the rubric on the page so you know what a top result looks like before you start.
02
// Lab 02 · Week 1
🎓 Tinkercad Refresher
// LAB OBJECTIVE
All 10 tutorials ticked off, snap grid tried at 0.1 mm, and a measurement table for your real object with every key dimension recorded twice in mm.
// Lab 02 · Sharpen the tools
Tinkercad, Precisely
Join the Year 8 class and log in with your last name
Run through the 10 tutorials, in order, even ones you know
Practise typing exact sizes in mm instead of dragging handles
Set the Snap Grid (bottom right) to 0.1 mm and feel the difference
Tinkercad works in mm, so measuring in mm means no conversion mistakes
Measure twice
Two different numbers? Measure a third time and keep the most common value
Widest point
Measure where the object is biggest: that's the space your product must make
Record the real size
Clearance gets added in the model, never squeezed into your notes
Why so fussy?A ruler is read to the nearest millimetre, and a 1mm reading mistake is five times bigger than the 0.2mm gap you're trying to get right. Careful measuring now saves a whole print round later.
03
// Lab 03 · Week 2 · Starts with a Daily Review
✏️ Concepts & Spec
// LAB OBJECTIVE
Three concepts compared, one chosen with reasons, and a design spec with your measurements and rules, submitted.
// Lab 03 · Compare before you commit
Three Concepts, One Winner
Sketch 3 different concepts: label both parts and show how they join
Score each out of 3: meets the need, easy to print, parts fit simply
Choose the winner and write why, using the scores as evidence
Write your design spec and submit it with the sketches via Connect
The design spec
A short table with:
Part A and Part B
How they join
Your key measurements in mm
Which design rules apply
Keep it simpleA simple joint that works beats a clever joint that doesn't. A peg in a hole, or a lid on a box, is a great first product.
// Lab 03 · Non-negotiables
Design Rules for Our Printers
Rule
Number
Why
Wall thickness
1.2mm minimum (2mm around handled holes)
Under 0.8mm may not print at all
Holes
Model them 0.2 to 0.4mm bigger
Printed holes come out smaller than designed
Overhangs
Keep under about 45 degrees
Steeper needs support material underneath
Size
Inside 150 x 150 x 150mm
That's the print bed, and smaller prints faster
Decide now what will be a hole, a slot or a peg, and roughly how big each one is, from your real measurements.
04
// Lab 04 · Week 2
🧪 Tolerance Coupon
// LAB OBJECTIVE
A labelled coupon with 4 clearances (0.2 to 0.5mm) and a matching peg checked from every angle and submitted, plus your written prediction.
// Lab 04 · The problem
Printers Lie a Little
A 3D printer never prints the exact number you type. Ours are out by about 0.2mm either way, and holes shrink a touch as the plastic cools. So a 10mm peg in a 10mm hole? Stuck.
Engineers solve this with tolerance: a small deliberate gap between parts. The right gap depends on the printer, so you prove it with a test coupon before betting your product on it.
Sliding parts: about 0.3mm on each touching surface
Starting points only. Your coupon tells you what our printers really do.
// Lab 04 · Build it
The Test Coupon
A small flat plate with 4 holes (or slots), each bigger than your peg by a different clearance: 0.2, 0.3, 0.4, 0.5mm
Label each hole with the Text shape
Model the matching peg as a separate piece
Keep it small and flat so it prints fast
Use View It: every hole cuts right through?
Write your prediction, then submit via Connect
// Lab 04 · Think ahead
Which Fit Does Your Product Need?
🤝
Stays together
A lid that must not fall off, a clip that grips: you want the snug end of your coupon.
🔄
Moves freely
A tray that slides out, a hook that lifts off: you want the loose end.
🎯
Both?
Some products need one snug joint and one loose one. Note which is which now.
While it printsIf 0.3mm turns out snug and 0.4mm loose, which does your product need? Decide what you'll do with the answer before you have it.
05
// Lab 05 · Week 3
🧩 Model Prototype 1
// LAB OBJECTIVE
Coupon results recorded, a clearance chosen with a reason, and two modelled parts for Prototype 1 that follow your design spec.
// Lab 05 · First, the answer
Read Your Coupon
Test every hole by hand
Record each one: too tight, snug, loose or falls out. Compare with your Lab 04 prediction: were you right?
Choose, with a reason
"0.3mm was snug, and my lid needs to stay on but still open." That one sentence is the most valuable line in your whole test log.
Your coupon result is now a fact about our printers. Every joint you model today uses it.
// Lab 05 · Build order
Model in Order
Part A first, from your Lab 02 measurements
Part B joins it using your coupon clearance
Holes and slots are separate Hole shapes, cut with Group It
Align It centres pegs, holes and slots
Move the parts apart, each flat on its biggest face
Check walls (1.2mm) and overhangs (45°) against your spec
Group last
Get every hole's size and position right first, then Group as your very last step. Fixing a badly placed hole after grouping usually means rebuilding that shape.
06
// Lab 06 · Week 3 · Starts with a Daily Review
✅ Check & Submit
// LAB OBJECTIVE
Prototype 1 passes the checklist, is peer checked, submitted for printing, and you have a test plan and test log ready.
// Lab 06 · Before the queue
Print-Ready Checklist
Check
Pass means
Walls
Every wall at least 1.2mm thick
Holes
0.2 to 0.4mm bigger than what goes in, and cut all the way through
Joint
The gap matches the clearance your coupon proved
Overhangs
Each part on a flat face, nothing past about 45 degrees
Size
Both parts inside the 150mm bed, not overlapping each other
Why peers checkSwap with a classmate and run the list on each other's parts. Use View It from underneath and the side: that's where holes that don't cut through hide. A failed print costs you a whole lesson.
// Lab 06 · While you wait
Write the Test Plan
Plan three tests
Fit: do the parts join as designed?
Function: does it work with the real object?
Measure: how close are printed sizes to the model?
Set up the test log
Four columns, ready to fill in next lab:
test | expected | what happened | pass or fail
Writing "expected" before you test keeps you honest.
07
// Lab 07 · Week 4
🔬 Test Prototype 1
// LAB OBJECTIVE
Fit, function, measure and peer tests recorded, and your top 3 changes written up as evidence, change and reason.
// Lab 07 · Run them all
Four Tests
🧩
Fit
Do the parts join? Too tight, snug, loose, or won't go: and by how much?
🎯
Function
Try it with the real object. Does it hold, cover, hang or sit as it should?
📏
Measure
Measure 3 key sizes and write the difference from the model, in mm.
👥
Peer
A classmate tries it with no help. Watch what confuses them.
First, look it over and note anything that looks wrong: warping, rough edges, missing details. Then fill the log with real numbers, not feelings.
// Lab 07 · Turn results into a plan
Evidence ▸ Change ▸ Reason
✗ Not evidence
"It doesn't fit." "The stand is bad." "Make it better."
✓ Evidence
"The peg is 0.3mm too wide" ▸ "make the hole 0.3mm bigger" ▸ "the 0.4mm coupon hole was snug."
Top 3Rank your problems from most to least serious and pick the top 3 to fix. A print that doesn't fit is your best evidence: it tells you exactly what to change.
08
// Lab 08 · Week 4
♻️ Redesign Prototype
// LAB OBJECTIVE
Three evidence-based changes made and noted, the checklist passed again, and Prototype 2 submitted for printing.
// Lab 08 · Controlled changes
Copy First, Then Fix
Copy the design before touching anything, so Prototype 1 survives for comparison
Make your top 3 changes, one at a time, noting the exact measurement each time
Check each fix hasn't broken something else: a bigger hole can leave a wall under 1.2mm
Add one improvement that isn't a fix: rounded edges, a logo, less print time
Run the checklist again, peer check, submit Prototype 2
While it prints, start your product sheet in Canva
One at a time
Change only what your evidence says. Redesign everything at once and it works? You won't know why. It fails? You won't know what broke it.
09
// Lab 09 · Week 5 · Starts with a Daily Review
🏆 Final Test & Sheet
// LAB OBJECTIVE
Prototype 2 tested against Prototype 1 with real numbers, a finished product sheet submitted, and a 60 second pitch planned and practised.
// Lab 09 · Prove it improved
Before & After
Same tests, same log
Repeat the exact fit, function and measure tests on Prototype 2, then put both prototypes side by side in a before and after table. Did each of your 3 changes work? Numbers, not opinions.
Honesty scores
Something still not right? Say so, and write what Prototype 3 would change. An honest result with a clear next step is worth more marks than a hidden problem.
// Lab 09 · Tell the story
Sheet & 60-Second Pitch
1. ProblemWho is the client, what did they need? One sentence.
2. DesignShow both parts and the join. Point at the real thing.
3. EvidenceOne number that proves it works or shows what you learned.
4. ImprovementWhat changed from Prototype 1 to 2, and why it worked.
The product sheet
One Canva page: product name, brief, both prototypes, key mm measurements, before and after results, your 3 changes, your next step. Put your best number in big text: "0.3mm clearance, snug fit."
The small deliberate gap that lets two printed parts fit.
Choral Response
Test coupon
A small print made only to find which clearance fits.
As tell BsBs tell As
Your design
Peg: 10.0mm Hole: 10.0mm "They're the same size, so they'll fit perfectly"
Printer accuracy
about 0.2mm either way
Fit test - peg and hole
peg 10.0mm
hole 10.0mm
✗
The peg is stuck solid. Why? How do you know?
As tell BsBs tell As
Your design
Peg: 10.0mm Hole: 10.0mm "They're the same size, so they'll fit perfectly"
Printer accuracy
about 0.2mm either way
Fit test - peg and hole
peg 10.0mm
hole 10.0mm
✗
No tolerance. Printers are out by about 0.2mm and holes print small, so a 10mm peg cannot fit a 10mm hole. Model the hole 0.2 to 0.4mm bigger: your coupon proves which.
Multiple Choice
Which of these pass our design rules?
Wall 1.5mm thick
Wall 0.5mm thick
Hole 0.3mm bigger than the peg
Hole exactly peg-sized
Part 200mm long
Flat base, gentle angles
Multiple Choice
Which of these pass our design rules?
Wall 1.5mm thick
Wall 0.5mm thickUnder 0.8mm may not print
Hole 0.3mm bigger than the peg
Hole exactly peg-sizedPrinted holes come out small
Part 200mm longBed is 150mm
Flat base, gentle angles
4 Grid
Clearance Numbers
Write the number for each fit
Snug fit gap______________
Loose or moving fit gap______________
Sliding parts, each surface______________
Our printers are out by______________
4 Grid
Clearance Numbers
Write the number for each fit
Snug fit gap0.1 to 0.2mm
Loose or moving fit gap0.3 to 0.5mm
Sliding parts, each surfaceabout 0.3mm
Our printers are out byabout 0.2mm
Match
Match each term to its meaning. Write your pairs, e.g. A - ?
A result you saw or measured, with a number in it.
Choral Response
Iteration
Improving a design in versions, using test evidence.
As tell BsBs tell As
Your Prototype 2
Changes made: 5 Changed at once: yes Notes kept: none
Test result
Lid fits now, but rattles
Change log - Prototype 2
✔ hole +0.4mm
✔ walls 1.2 ▸ 2mm
✔ new lid shape
✔ peg moved 5mm
✔ shorter base
changes made in Prototype 2
Which change fixed the fit, and which causes the rattle? How do you know?
As tell BsBs tell As
Your Prototype 2
Changes made: 5 Changed at once: yes Notes kept: none
Test result
Lid fits now, but rattles
Change log - Prototype 2
✔ hole +0.4mm
✔ walls 1.2 ▸ 2mm
✔ new lid shape
✔ peg moved 5mm
✔ shorter base
all five at once, no notes
You can't know. Five changes at once, no notes, so the evidence points at nothing. Change one thing at a time and note the exact measurement each time.
Multiple Choice
Which of these belong in a test log?
"Lid gap measured 0.4mm"
"It feels better now"
"Fits snug, 10 out of 10 tries"
"Pretty good I think"
"Printed width 49.8mm vs 50mm model"
"Probably fine"
Multiple Choice
Which of these belong in a test log?
"Lid gap measured 0.4mm"
"It feels better now"Not a number
"Fits snug, 10 out of 10 tries"
"Pretty good I think"Opinion, not evidence
"Printed width 49.8mm vs 50mm model"
"Probably fine"Test it and write the number
4 Grid
Name the Test
Write which of the four tests finds each problem
Parts will not join______________
Phone falls off the stand______________
Printed part 0.4mm narrow______________
A classmate gets confused______________
4 Grid
Name the Test
Write which of the four tests finds each problem
Parts will not joinFit test
Phone falls off the standFunction test
Printed part 0.4mm narrowMeasure test
A classmate gets confusedPeer test
Match
Match each term to its meaning. Write your pairs, e.g. A - ?